What did you do to your Patrol today!

[TPC]

Chopped the mesh out of the bottom half of the cargo barrier so I could use the wasted space between the cargo barrier and the back of the drawers.

Also fitted some LED lights to the small barn door.

[fourj]

Installed new UHF aerial, after some p@!:k decided it was more useful to them than it was to me last weekend!
Even had to unscrew a grub screw to take it!

[clubbyr8]

Ran cabling for the reversing camera and extra reversing lights...

[Stropp]

Not me but got the patrol back after getting it serviced and checked over prior to the Simpson trip also finally got the winch fitted albeit just a crappy Chinese on until I can afford a decent one.

[Hodge]

Just upgraded the interior LED lights to these large babies, will see what theyre like tonight . I also realized they fit perfectly in the reading lights up front, so I ordered another set.
Attachment 45417Attachment 45418Attachment 45419

These were it.
http://www.ebay.com.au/itm/320924739...84.m1497.l2649

[Cuppa]

Just finished mounting the sidesteps/running boards donated to me by GU CAMPER who has replaced them on his truck with some proper rocksliders. Wish I'd done the driver side first, that way I would have known how they were supposed to sit, but I didn't, I did the passenger side first. This was the side where GU CAMPER had used them as rocksliders. Much cursing & a bit of gentle persuasion with an angle grinder, a set of files, a couple of hacksaw blades & a 3lb lump hammer finally saw it mounted. Drivers side went on no trouble. It was only then I realised that the passenger side was bent up a couple of inches & a bit rearwards too. I reckon he was having fun when he did that! Still they are on, & look alright, & more importantly (& the reason for fitting them) will now protect the sills from the gravel attack they have been susceptible to.

Thanks Andy.

[Stropp]

Mounted the radio antennae and ran the cable to the inside of the cabin, just need to remember to seal the firewall up now to stop the water getting in.

[taslucas]

Drove it then heard it go bang a few times from the driver side front hub/cv.... Hmmmm....
Hubs in 2wd or 4wd: 5 "bangs" in 20 mins.
Hubs out, 2wd no bang but an occasional slight squeak.....

Any ideas?

[jay see]

I drove my to work and then I drive it home, same as yesterday.
Sorry guys I had to do it at least once.

[Ben-e-boy]

Drove it then heard it go bang a few times from the driver side front hub/cv.... Hmmmm....
Hubs in 2wd or 4wd: 5 "bangs" in 20 mins.
Hubs out, 2wd no bang but an occasional slight squeak.....

Any ideas?

Hahaha..... sound like the front end has to come apart... I would say cv.