OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 31

Thread: Oil on air filter and lots of oil in catch can

Threaded View

  1. #19
    Expert
    Join Date
    Mar 2012
    Location
    Unafordable
    Posts
    487
    Thanks
    19
    Thanked 359 Times in 224 Posts
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    I'm sorry but that isn't 200 ml. Grab your kitchen measuring cup and see how much is 200 ml (use water of course).

    Too much oil in the sump will contribute to excess oil out of the blow by. I don't know how it is on CrD but on Di 7.5 L is all it takes to go to full mark on the dipstick.

    There is a picture somewhere with oil sump removed and filled with 8.2 L of oil, it literally almost overflows at the side edges.
    That's plainly wrong but is a result of Nissan doing a dodgy fix on early 5.6 L oil volume.

    If you are not doing oil changes yourself chances are that mechanics are overfilling the engine every oil change progressively as it takes a while to drain it properly (I allow for + 1 hour)

    No garage will do that, at best it will be like 10 mins.

    Check the oil level in the morning before you start the engine so you can see where it is on your dipstick.

    Cheers
    Last edited by Rumcajs; 18th May 2014 at 03:40 PM.

  2. The Following 2 Users Say Thank You to Rumcajs For This Useful Post:

    Hodge (18th May 2014), Rickie3 (18th May 2014)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •