they also make a decent bash plate.
Not entirely convinced a ROPS would be required for a lap.
only you can decide on that, I had an internal roll cage in my Troopy[TJM]
they also make a decent bash plate.
Not entirely convinced a ROPS would be required for a lap.
only you can decide on that, I had an internal roll cage in my Troopy[TJM]
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Mate id be saving the 500 for fuel, unless you have Narcolepsy or plan on launching over ularu I dont think its Necessary itll just eat into your storage space also lol
Only front
Agree with the others.
I looked into a cage after mine had a "sleep" (pics below), all the ROPS roll bars I could find at the time, severely restricted cargo space due to the rear brace bars, and they have a dodgy cargo barrier that does not cover the space you need to protect you from flying cargo, I soon gave up on the idea.
Having said that, the cost of getting a decent cage "made" to suit a family sedan (with compliance), would be heaps more than $500, its much harder than making one for a bush basher.
![]()
dannypatrol (13th May 2014)
Don't think a Locker will protect him much in a roll over anyway tho Troy , bwbhahaha !
What is your budget? I have a 6 point cage/rops in mine, and have been thinking of pulling it out. The right $$$ would help me make the decision
n.b. like new condition, installed but never used for its intended purpose lol... almost did once... but my girlish squeal of terror must have flipped me back to a safer angle
Last edited by Biscuits; 13th May 2014 at 08:10 PM. Reason: being a funny bugger
33's, 2' lift, Snorkel, Warn XD95000 Winch (Just exploded... July 2014), UHF, 6 Point Cage, and no clue on how to use any of it... I drove over a gutter once!!! and it wasn't the rounded variety either!!!