Axle articulation photos and measurements

[Clunk]

just gotta love those flex shots, nice one lads

[Ben-e-boy]

Here's mine at the workshop today - trying to work out the best approach for fixing the upper control arms hitting the fuel tank (reshape the tank, SE bent control arm ... new suspension! I wish!! LOL)

Attachment 2830

Bend it yourself!! I dare say that you would have a suitable hammer for the job lol

[YNOT]

Here's mine at the workshop today - trying to work out the best approach for fixing the upper control arms hitting the fuel tank (reshape the tank, SE bent control arm ... new suspension! I wish!! LOL)

Attachment 2830

Reshaping the tank does work (I had it done to my last GQ) but the S.E. bent upper arm has to be the easiest solution.

Tony

[aiKzo6]

That's a awesome looking troll mate, looks tough as in the pics

Cheers fletch

Here's mine at the workshop today - trying to work out the best approach for fixing the upper control arms hitting the fuel tank (reshape the tank, SE bent control arm ... new suspension! I wish!! LOL)

...i want a forklift!

[Finly Owner]

Here is mine with the old 2'inch lift, the shocks extend to about 600mm she goes alright

Now that's awesome, well done

[Bigrig]

Reshaping the tank does work (I had it done to my last GQ) but the S.E. bent upper arm has to be the easiest solution.

Tony

Agreed mate - too much stuffing around with the petrol tank!

[Bigrig]

Bend it yourself!! I dare say that you would have a suitable hammer for the job lol

LOL!! Too right mate ... Might end up a bit short and shonky, but that's what DIY is all about ... isn't it?? LOL!!!

[Ben-e-boy]

big rig if you want to try bending up an upper control arm I have the old ones (standard) I also have 3 lower control arms

[YNOT]

The finished length of the bent arm needs to be the same length as a standard straight arm, bending a standard upper arm wont work, it will end up too short. Scott just needs to pull his finger out and order the part. If he orders it through Suspension Stuff it will save him a few hours driving.

Tony

[Ben-e-boy]

The finished length of the bent arm needs to be the same length as a standard straight arm, bending a standard upper arm wont work, it will end up too short. Scott just needs to pull his finger out and order the part. If he orders it through Suspension Stuff it will save him a few hours driving.

Tony

Yes But you cut it , sleeve it and bend it