The new q

[healy]

Pics or it didn't happen

Also with the new front bar on. Swapped my bar for identical bar even same colour very happy this ones to suit 2" bodylift just got to trade my rear bar for another 2" lifted one or sliders.

[sil3nt_dr3ams]

hey healy just for curiosity can you grab a tape measure and measure the distance between the center of the tyres. lol you must be tracking a shitload wider. I just changed to 285/75/16's and I fitted 5 different offset ryms why I had my car up on stands doing hubs and bump stops. Tested checked full travel out of all the ryms the best results was

SIZE: 16X8 Inches

PCD: 6/139.7

OFFSET: 13N (i.e -ve13

They gave me the most travel, clearance and still sit nicely in guards.

[healy]

hey healy just for curiosity can you grab a tape measure and measure the distance between the center of the tyres. lol you must be tracking a shitload wider. I just changed to 285/75/16's and I fitted 5 different offset ryms why I had my car up on stands doing hubs and bump stops. Tested checked full travel out of all the ryms the best results was

SIZE: 16X8 Inches

PCD: 6/139.7

OFFSET: 13N (i.e -ve13

They gave me the most travel, clearance and still sit nicely in guards.

Ill get tape out shortly mate. I was running the 16x8s 285 75 16 before I swapped for these tyres they do sit in nicely even with the factory flares.

[sil3nt_dr3ams]

cheers I'll do the same,

[Sir Roofy]

Heals you nedd to get into a 4x4 shop
you have some knowlege about gear

[healy]

cheers I'll do the same,

Measurement is 1720 center to center roughly the equivalent as running a 285 75 16 on GU rims on the GQ from memory

[healy]

Heals you nedd to get into a 4x4 shop
you have some knowlege about gear

Id love to have a little shop that is more suited to doing budget builds and not ripping off people like the ones that are located all over the world.

[healy]

So I picked up a brand new mudstar 35" last night on a rim for a slab of cold ones. Im stoked ive just fitted my mudzillas flares and bodylift for the absolute cost of wait for it $0 thats right cant beat that price loving the monster at the moment.

[sil3nt_dr3ams]

Id love to have a little shop that is more suited to doing budget builds and not ripping off people like the ones that are located all over the world.

Couldnt agree more mate I build everything myself, I'll grab a measurement in a sec. Do have hands full atm,

[healy]

Couldnt agree more mate I build everything myself, I'll grab a measurement in a sec. Do have hands full atm,

They look mean mate. I need to learn to weld as I got a rear carrier bar but is a little bent and I would like to fit a jerry can holder on the otherside