Soooooo much better spot for the sub tank switch. Was an easy mod but the wires were to short and i remember i had to splice the loom and extend the wires to reach the new position. But i love it!!
Soooooo much better spot for the sub tank switch. Was an easy mod but the wires were to short and i remember i had to splice the loom and extend the wires to reach the new position. But i love it!!
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Ok 2 questions.
1. How do you get out the blank plate from below the demister. Does the whole thing come out with the demister and hazards switches attached or do you have to go in from the back? Looks like maybe the whole 3 pop out together somehow.
2. How does the center console come apart to move the sub tank and arieal switches ?
There are two screws just above the aircon controls just undo them and pull the whole lot forwards from the bottom and it will come out its only clipped in at the top.
from memory there are two clips on the blank plate you can easily get to from the back
Patrol-Guy (5th February 2014)
Correct 2 clips accessed from the rear
Patrol-Guy (26th April 2014)
Posting Permissions
Reply With Quote