OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 45

Thread: CRD Slow starting then black smoke when power on

  1. #11
    Beginner
    Join Date
    Mar 2014
    Posts
    28
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    OK replaced fuel filter with no joy, checked fuel pressure with OBD2 app and looks OK. Disconnected the harness from EGR with no change. Just to set my mind at ease I have done a cylinder cut out test with no change. (For those that want to know how just disconnect the harness from the injector on the cylinder you wish to cut out). The thing I don't like is when I am mucking around with these plugs the ECM should throw a fault but it hasn't been, I have heard that there is a relay that controls this but without a Nissan workshop manual its slow growing.

  2. #12
    Beginner
    Join Date
    Mar 2014
    Posts
    28
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    OK checked oil level and found it was a bit low so pulled out the intake hoses off the turbo, heaps of oil on the pressure side. So looks like I am up for a new turbo.

  3. #13
    SPAMINATOR growler2058's Avatar
    Join Date
    Feb 2011
    Location
    Shed
    Posts
    23,652
    Thanks
    15,807
    Thanked 12,954 Times in 6,829 Posts
    Mentioned
    45 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Joelshero View Post
    OK checked oil level and found it was a bit low so pulled out the intake hoses off the turbo, heaps of oil on the pressure side. So looks like I am up for a new turbo.
    Bloody hell! How many k's it done

    IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK

    WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!

  4. #14
    Beginner
    Join Date
    Mar 2014
    Location
    mandurah w.a.
    Posts
    10
    Thanks
    0
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    hey joelshero, ive got the same drama with mine. already blocked egr off as thats what i thought it was. replaced turbo also. now my next step is to do injectors, pump and may even need to do fuel manifold??? still not sure what it is though. any updates would be good. ill also update you if i find anything.

  5. #15
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Shite and I thought the Di were a worry, seems the Cr have there own set of problems.
    What with Geeyoutoo's oil pump coming loose, will follow this with interest now.
    seems catch cans are a must as is the EGR block, who knows eh
    Hope you're not off the road for very long anyhow
    From memory you can swap the ECU relays with the air con one just to test it
    I think it was under passenger dash, not 100% though
    Last edited by threedogs; 13th March 2014 at 05:55 PM.
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  6. #16
    Patrol Guru ova50's Avatar
    Join Date
    Nov 2011
    Location
    Syd, Northern Beaches
    Posts
    803
    Thanks
    1,358
    Thanked 946 Times in 330 Posts
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I hope you both manage to sort it out and post what the end result is.
    I'm concerned after reading about the woes.
    Was a CRD

  7. The Following User Says Thank You to ova50 For This Useful Post:

    threedogs (13th March 2014)

  8. #17
    Beginner
    Join Date
    Mar 2014
    Location
    mandurah w.a.
    Posts
    10
    Thanks
    0
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    funny you say that three dogs. my ac fan stopped working about the same time...under passenger dash as in behind glove box or near foot well area???

  9. #18
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Yeah but not 100% lh kick panel
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  10. #19
    Beginner
    Join Date
    Mar 2014
    Location
    mandurah w.a.
    Posts
    10
    Thanks
    0
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    have some more info...
    OK i just disconnected my injectors one by one. you can here a significant engine idle/noise change when doing this. but for # 2,3 and 4 injectors, when i revved the engine there was no change in smoke. but, when i disconnected #1 injector the smoke was minimal. does this mean i have a faulty/leaking injector. this would explain the hard starting.

  11. #20
    Beginner
    Join Date
    Mar 2014
    Posts
    28
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hey guys not good to hear that there is others with the same drama. Been moving house so haven't had a chance to have more of a look and haven't tried anything yet. When I was moving the car to the new house I noticed my A/C not working, still got the fan though. I am back to thinking that this is an electrical fault. Can someone that has a good car pull the harness from any of the sensors and tell me if it throws a fault. I am busy unpacking for the next few days so won't be much help. But for those with this issue my advice is not to change expensive fuel system components.

Page 2 of 5 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •