after market alarm

[Rickie3]

I am in a real bother here ive wired everything up and the 3 doors are locking and unlocking with the remote perfectly, because my patrol uses a key to unlock all the doors prior to installing the alarm it never had a factory fitted remote so no motor in the drivers side door, so anyway today I bought a 2 wire actuator kit from jaycar thinking it would be straight forward to wire straight up the 2 wires to the trigger wires on the alarm central locking wires, anyway butted into them and nothing the motor doesnt actuate, when I installed the two central lock activate wires both black and white, I butted them into the door lock button on the arm rest which are black with yellow trace and black with red trace, but this way the new motor wont work at all, so anyway I followed this thread http://www.nissanpatrol.com.au/forum...-minutes/page3 I undid all my wiring, as per thread said it was a positive trigger, I wired the central lock wires to the specifics in that thread, anyway when pressing the remote it blows the fuses straight away on the 2 black and white wires, so it makes me think the system in my 2000 patrol is negative trigger, or the wiring in my patrol is different to whats specified in the other thread, does anyone have any pointers as to what I could be doing wrong please ive attached the wiring diagram of my alarm system and have followed it to a T, its just got me baffled a bit