Bloodyaussie's GQ

[Alitis007]

I've got a Locker to ya penis heads!!!!!!!

I am really gob smacked but Harry must have put the screws in to get my head done so quickly as I just got back from the workshop and George and Billy were torquing down the head... they think it may be running tomorrow?

I feel special!!!!

Yeah my old boy can be pretty persuasive when he wants, plus it helps using the same bloke for 20 years XD

[Alitis007]

More shiny bits
Bottom end looks good and no excessive movement ImageUploadedByMotorculture1393591967.201966.jpg
Re surfaced lifters/ push rod buckets or whatever you like to call them and you can see i polished the block clean from any contaminates
ImageUploadedByMotorculture1393591696.944398.jpg
Push rods cleaned and inspected for straightness and stress fracturesImageUploadedByMotorculture1393591848.241232.jpgImageUploadedByMotorculture1393591864.093179.jpg
Welded up the expansion plugs in the head coz 1 was cracked, straightened, valves re seated and given a light skimmed for a nice clean and polished mating surface ImageUploadedByMotorculture1393592260.737806.jpgImageUploadedByMotorculture1393592279.721940.jpgImageUploadedByMotorculture1393592291.605591.jpgImageUploadedByMotorculture1393592323.475034.jpg
torqued down,valve clearances set, lubed and ready to go home ImageUploadedByMotorculture1393592411.902299.jpgImageUploadedByMotorculture1393592437.534449.jpg

[happygu]

I rekon theres some back pedaling happening now with mates rates and love jobs getting thrown in there lol

Ha, ha....

In all seriousness, I am impressed by the speed and progress.

I should expect it though, as I am a Sparkie who likes to do all the jobs but even though i am really handy, i am no Chippie and when I do a job that takes me all day, my Chippie mate would do it in 3 hours.

[Alitis007]

Ha, ha....

In all seriousness, I am impressed by the speed and progress.

I should expect it though, as I am a Sparkie who likes to do all the jobs but even though i am really handy, i am no Chippie and when I do a job that takes me all day, my Chippie mate would do it in 3 hours.

Thanks mate, dads been in the game for over 35 years so the people we use know the quality he demands with time always a factor, sometimes we can get certain jobs fast tracked but this job would normally have a 7 day turn around time anyway even when we are flat out. Also having the right tools and equipment at your disposal makes it alot easier lol

[Drewboyaus]

More shiny bits
Bottom end looks good and no excessive movement ImageUploadedByMotorculture1393591967.201966.jpg
Re surfaced lifters/ push rod buckets or whatever you like to call them and you can see i polished the block clean from any contaminates
ImageUploadedByMotorculture1393591696.944398.jpg
Push rods cleaned and inspected for straightness and stress fracturesImageUploadedByMotorculture1393591848.241232.jpgImageUploadedByMotorculture1393591864.093179.jpg
Welded up the expansion plugs in the head coz 1 was cracked, straightened, valves re seated and given a light skimmed for a nice clean and polished mating surface ImageUploadedByMotorculture1393592260.737806.jpgImageUploadedByMotorculture1393592279.721940.jpgImageUploadedByMotorculture1393592291.605591.jpgImageUploadedByMotorculture1393592323.475034.jpg
torqued down,valve clearances set, lubed and ready to go home ImageUploadedByMotorculture1393592411.902299.jpgImageUploadedByMotorculture1393592437.534449.jpg

Bloody amazing job there George!
Do you expect it to be making a bit more power with all the rehab work?

[Bloodyaussie]

Got to keep my mind busy this morning. ..

Was hoing to work then mags said she is seeing her aunty and I need to watch the kids... bloody hell!!

1393622509365.jpg1393622547305.jpg

[Alitis007]

Bloody amazing job there George!
Do you expect it to be making a bit more power with all the rehab work?

Thanks Drew, it should have more torque and Jonathan should notice the deference while towing.

[Alitis007]

Got to keep my mind busy this morning. ..

Was hoing to work then mags said she is seeing her aunty and I need to watch the kids... bloody hell!!

1393622509365.jpg1393622547305.jpg

Why did you put the pic from last week while i was tuning the other motor for ?? Lol

[krbrooking]

You guys are absolutely amazing. Top job and top quality, well done to all. I am sure it is a huge relief for you Jonathan.


Sent from my iPhone using Motorculture mobile app

[MudRunnerTD]

Work faster George!! Fair dinkum mate your dragging ya bloody arse around this thing!! Get on with it already!!!





. Love ya work mate