Generator Quiet Box

[rafa]

No the heat from the genset we were talking about

Yeah was gunna put the vent/fan in the esky lid. Still work in progress. Only started yesterday

[threedogs]

Looking good and you'll still have airflow over the genset as well.

[rafa]

Will be fuelling it externally as well with one of these for much longer running times.

ImageUploadedByMotorculture1391386355.622588.jpg

[threedogs]

too bad you can't use stainless steel braided fuel line.
never cut that stuff
Be nice if you could bring the airfilter to the outside
of the ice box somehow, don't want to be sucking hot air

[rafa]

too bad you can't use stainless steel braided fuel line.
never cut that stuff
Be nice if you could bring the airfilter to the outside
of the ice box somehow, don't want to be sucking hot air

Prob can mate.

[rafa]

too bad you can't use stainless steel braided fuel line.
never cut that stuff
Be nice if you could bring the airfilter to the outside
of the ice box somehow, don't want to be sucking hot air

Well with side cover off the genny it's coping all the fresh air right on side

[threedogs]

can only try it and see what temps it generates inside the box

[Mitch20b]

That's a great idea

[rafa]

That's a great idea

Thanks mate. Don't rush off and build one yet. Once I fit the exhaust shroud I'll do some extensive testing in relation to temp etc.

Will post results here.

Marty.

[rafa]

Ok so today I got back to it and fitted heat shield through esky

ImageUploadedByMotorculture1392459141.640015.jpg

ImageUploadedByMotorculture1392459153.416534.jpg

ImageUploadedByMotorculture1392459166.391546.jpg

ImageUploadedByMotorculture1392459187.277265.jpg

Need to add a grill / vent to outside next.