There will be mate. It might not be hugely noticeable but any improvement on the factory setup is a positive.Originally Posted by patrol2.8
There will be mate. It might not be hugely noticeable but any improvement on the factory setup is a positive.
Yeah was a bit disappointed with the hole size in the lid also the original hole is off centre to the filter new hole is now in the middle of the filter don't know if it makes any difference just didn't seem right to me
Theres only one thing tougher than my truck............. YES DEAR GOING TO DO THE LAWNS NOW
WARNING: Towballs used for recoveries,can and do kill people and damage property
Yeah mate. Believe it it not the 4.2 boxes are basically the same for engine with much more capacity. So you can imagine how restricted they are.
oh well gives us something else to modify I guess
WARNING: Towballs used for recoveries,can and do kill people and damage property
MudrunnerTD the part number for the 3 inch rubber bend is P547694 and you should be able to get it through any company that sells Donaldson products if you like I can give you the number where I purchased it from
WARNING: Towballs used for recoveries,can and do kill people and damage property
Got my cobra on on fleabay for $38 from memory delivered...
MudRunnerTD (26th January 2014)
Mine was 38 but i had to add 10 bucks for postage did you notice much difference in the car once installed havnt been able to test mine yet
WARNING: Towballs used for recoveries,can and do kill people and damage property
I have the 3ltr motor. So I did this mod with the hi flow maf housing. I noticed no improvement but now I can raise my boost levels far beyond before without getting limp mode.
Reply With Quote
