Hard to say megatexture. The bonnet has been the learning curve so ofcourse it's taken longer than normal. But at a rough guess not including drying time, id say 12-15 hours over the last week maybe...
Hard to say megatexture. The bonnet has been the learning curve so ofcourse it's taken longer than normal. But at a rough guess not including drying time, id say 12-15 hours over the last week maybe...
I think my advise is already late, but bottom plastic parts on doors fixed on the plastic anchors and 2 side adhesive tape. Small parts only with tape.
I used strong steel wire to cut the tape.
I'm Alexander and I'm the happiest owner of GQ Nissan Safari in the whole Central Asia
Parksy (21st December 2013)
Thanks wine maker! Much appreciated!
Another pic which shows a little orange peel, but a final wet sand and polish will turn this into glass.
growler2058 (22nd December 2013), MudRunnerTD (14th January 2014), threedogs (23rd December 2013)
Has anyone removed the rear barn door handle/number plate light assembly? I remember once having a quick look in there but can't remember if it was an easy removal...
It's pretty straight forward to take off mate.
Parksy (23rd December 2013)
Ok, have been on holidays for the last 3 weeks and got home and carelessly gave it a buff and burnt through the paint at the same time. So I cracked the sh1ts and removed the bonnet, stripped it down and sprayed it instead.
Edit should have added that I haven't given up, just had enough of the bonnet, what with it being such a large section and hard to reach, especially while on the car. I couldnt do the roll on method while it was unbolted and off the car as I'll need the car to drive so sprayed on was the quickest and easiest option to get it out of the way.
Stay tuned.
Last edited by Parksy; 14th January 2014 at 09:38 PM.
BigRAWesty (14th January 2014)
So are you spraying the rest or going to push on rolling?Originally Posted by Parksy
Ok, have been on holidays for the last 3 weeks and got home and carelessly gave it a buff and burnt through the paint at the same time. So I cracked the sh1ts and removed the bonnet, stripped it down and sprayed it instead.
Cheers
Kallen Westbrook
Sorry westy, decided to edit at the same time.
BigRAWesty (14th January 2014)
Nice job Parsky
I think i will try it also on my GQ. Did anyone of you guys know how to obtain mat (not glossy) aspect on paint? it shall be the paint itself or the varnish (here i don't know if i used the correct word)
Looking abit bare at the moment, but bonnet is back on.
Clunk (17th January 2014)
Posting Permissions
Reply With Quote
