RD28 - loss of power - very sensitive accelerator pedal
Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
So I have done a bit of reading myself. A few things stick out.
When working out which pin is which, work from the side of the connector which has the wires going into it. (pop off the plastic hoop that protects the wires entering the back of the plug.) The back of the plug, if you think of it that way.
Above my thumb is close to the other side, which you may have mistaken for pin 25. It could be you are trying to read the pins from the side of the plug pictured below. The numbering is backwards if you are trying to do it this way.
Anyway, if you are doing the tests with it plugged into the ecu, stick your probe down the back of the wire.
I doubt the pins you are after are missing.
Edit: to get perspective on the first two photos, in the bottom photo there is a ridge in the Rh side of the connector. This ridge faces the camera in the first two photos.
Last edited by P4trol; 10th December 2013 at 07:10 PM.
Reply With Quote