Sound dampening..

[Stropp]

The roof... you are really getting into it..
Yea mate. Both Off eBay.
Foam
http://pages.ebay.com/link/?nav=item...d=251263917315

Rubber
http://pages.ebay.com/link/?nav=item...d=261165939800

westy those links dont go to the items????

[BigRAWesty]

westy those links dont go to the items????

Have fixed.

[BigRAWesty]

We'll guys. It's in..
And the rebuild has begun..
10m2 is enough to do the whole.. And the fire wall twice.
Started reassembling the dash.
Have 5 sheets of butyl left so I think I'll do the inner door skins to.. Why the hell not hay..

Can't wait to Start it..
1386039016815.jpg
1386039041852.jpg

[threedogs]

Did you use that special roller to apply the sheets ,BTW bloody big job there buddy. lol

[BigRAWesty]

Did you use that special roller to apply the sheets ,BTW bloody big job there buddy. lol

No.. But Geeze my hands are thanking me for it.. Lol
Bloody cramping up and look like they took on a shredder..

I'd recommend the roller..
Wife reckons I'm building a space ship!! WTF..

[threedogs]

Sure she'll be happy with the results,,
did you slide some pink batts in the 1/4 panel cavity?

[BigRAWesty]

Sure she'll be happy with the results,,
did you slide some pink batts in the 1/4 panel cavity?

No but have covers right around to the doors, in and around the fuse box.
Will be stuffing the rear 1/4's when finished.
I'm applying a shoit load of rust converter, then that paint on stuff, and then stuff em with something..

[BigRAWesty]

WwwWell I picked up this stuff
1386455697286.jpg
And shoit Its thick..
$45 ish from auto barn.
As I suspected its basically paint on rubber / tar, but I don't mind as iT's going in the rear 1/4's, wheel arches and the few spots I had to weld repair to give those areas the original coating..

Well, shoit it's thick.. Buy throw away brushes.. And some rubber gloves..

You get a lot of coverage from 4L.. I'd say easy a few coats of the whole floor pan (but keep reading), after applying a good coat in the 1/4 (slapping it in) I used roughly 150ml..

This stuff is good for sealing a surface, but in my opinion has nothing On the dynamat..
After 1 good coat there is no difference between coated and uncoated panels, where with 25% coverage of the panel with dynamat it had a huge affect.

So imo and as I suspected its no good for "sound dampening" as it has no weight to it (refer to link in first post), but
Sealing, rust prevention and mess making.. Yes it ticks those boxes.

But in another side note, 4.5m2 of dynamat has covered the car. I didn't do the cargo area Floor as the draws add a huge dampening affect, But I have enough left over to cover the inner skins of the front doors. So if you want to do the cargo area it's perfect.
I went with more a 75-80% coverage with the dynamat. If you stretch it to 25% then the 3.5m2 pack will do..

[threedogs]

Are you painting the inside of wheel arches with this "stuff"?

[BigRAWesty]

Yep.. But shoit it's sticky..