Water Temperature Gauge Plumbing Question

**Cervantes** · 16th November 2013, 08:08 AM

Originally Posted by macca

Bought an adaptor and did this....

Macca,

I have the same connection and so am going to try and find the same adaptor as you used. I don't suppose that you can remember the thread size that screws into the thermostat housing?

Or better still where you bought the adaptor?

Many thanks

**Cervantes** · 16th November 2013, 08:43 AM

Originally Posted by MudRunnerTD

I Gotta see the pics of your 2001 GUII cut down Extra Cab bud!! An unusual modification but it will look Sik!!

When you get it Members Ride thread for sure mate!!

Have started a "Members Rides" thread here............

http://www.nissanpatrol.com.au/forum...Andy-s-New-Ute

Limited pics so far, but will keep adding as I do more work.

Cheers

**trekster** · 16th November 2013, 07:12 PM

Now installed and working a treat!

ImageUploadedByMotorculture1384591331.369940.jpg

Sent from my iPhone using Motorculture mobile app

**macca** · 17th November 2013, 07:43 PM

Originally Posted by Cervantes

Macca,

I have the same connection and so am going to try and find the same adaptor as you used. I don't suppose that you can remember the thread size that screws into the thermostat housing?

Or better still where you bought the adaptor?

Many thanks

Andy I have the bung that came out somewhere, get the thread from that for you.
I bought the adaptor at SpeedFlow Taree

**Cervantes** · 17th November 2013, 08:10 PM

Originally Posted by macca

Andy I have the bung that came out somewhere, get the thread from that for you.
I bought the adaptor at SpeedFlow Taree

Macca,

Many thanks for that. Much appreciated.

**macca** · 18th November 2013, 07:00 AM

Its 12.0mm diameter with a pitch of 1.5mmm
Get an adaptor with that on the O/S and 1/8'' NPT for the sensor and you should be sweet.
Speedflow Products Pty Ltd TAREE NSW. 02 65526144, 1800242918

**Cervantes** · 18th November 2013, 07:39 AM

Originally Posted by macca

Its 12.0mm diameter with a pitch of 1.5mmm
Get an adaptor with that on the O/S and 1/8'' NPT for the sensor and you should be sweet.
Speedflow Products Pty Ltd TAREE NSW. 02 65526144, 1800242918

Macca,

Many thanks for that.

All the best

**Cervantes** · 18th November 2013, 07:59 AM

Working FIFO and being stuck on a remote construction site for the next couple of weeks I managed to score one from ebay.

http://www.ebay.com.au/itm/271316118...84.m1439.l2649

Cheers

User Tag List

Thread: Water Temperature Gauge Plumbing Question

Thread Tools

Display

The Following User Says Thank You to trekster For This Useful Post:

Many Thanks

The Following User Says Thank You to macca For This Useful Post:

The Following User Says Thank You to Cervantes For This Useful Post:

Posting Permissions