GU cargo barrier clear PVC cover

[Hodge]

Getting a cargo barrier this weekend. I've seen several patrols have a very nice, clear or tinted PVC cover/backing. One I've seen recently was a really nice job fitted to the barrier, with edges done properly.
Where do people get these from ?

[AB]

Was it Perspex routed out or jigsawed?

[Hodge]

I should have mentioned it was the soft pvc veriety, what I'm after. Just like your ordinary outdoor roll up blinds, not the hard perspex.

[04OFF]

Any auto trimmer can make these up, they use the same clear PVC they use for the rear windows on a soft top roof, most trimmers will have it in stock, then its just some button clips or velcro (will also have in stock)

[BigRAWesty]

Yea would be a custom job.

[04OFF]

You can actually get them pre-made from the barrier manufacturer for some models, but ive only ever seen them for vans not cars ?

I had a pre-made one in my Sprinter van, i had to, as the rear cargo area was over 4M long, so cooling that, plus all the gear in the back, was just not practical.

[megatexture]

I just got some clear PVC and zip tied it to the cargo barrier and trimmed it off to fit .

Later I cut it off as the boot was getting really hot while we were traveling out west at during summer and the fridge was working its ass off so I removed it to let some air conditioning get back there. I won't be putting any back on.

[BigRAWesty]

Quick question. What's the idea of it?

[megatexture]

Can't speak for everyone but I did it so when we got back from a hike or sight seeing and the car was locked up and 60degrees + it would cool down faster with the air conditioning on lol

[BigRAWesty]

Yea fair enough, but as you said it stressed everything else hay?