Drivers side
1380176807210.jpg
Passenger side
1380176843861.jpg
If you do find cracks remember to drill the end of the So you have a radius end, or it will keep cracking.
Small 3mm hole is enough
Drivers side
1380176807210.jpg
Passenger side
1380176843861.jpg
If you do find cracks remember to drill the end of the So you have a radius end, or it will keep cracking.
Small 3mm hole is enough
Cheers
Kallen Westbrook
Parksy (26th September 2013)
Picked up my front rotors. My RDA extreme gold pads for
Front and rear should arrive next Tuesday , can't wait to fit
them.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Installed a compi shift 2 stand alone tcm in my 01 patrol converted from 3.0 to td42t
ImageUploadedByMotorculture1380191411.487051.jpg
threedogs (30th September 2013)
Finally fitted a new power aerial mast.
Breather for main tank blocked. Got cleaned ready for another week if work. Rain coming soon so ordered new winch too.
2002 4.2TD ex Telstra
Thanks mate! Spent sometime working on it! Almost ready for the road again!
Stropp (27th September 2013)
Got wheel bearing done.. Guess it didn't seat properly because all nuts were tight.
So have reset and put back together. Getting more confident with it all now.. 15 mins to do side..
Then started on the roof rack.. Got the width right but it sits 3mm Off the roof so to low.. Half removed the old bulky mounts and will make some nice ones..
Cheers
Kallen Westbrook
Yesterday I fitted a baby capsule now it's nice and cosy across the middle row of seats with three kids seats on there.
Glad I got the crab bar fitted
ImageUploadedByMotorculture1380494857.983950.jpg
Sh!t is getting very real now, tomorrow we will have three kids.
Winnie (30th September 2013)