What did you do to your Patrol today!

[liftlid]

Retainer to stop your cab from lifting off

Is it because there are less body mounts on the ute compared to the wagon?

[93patrol]

More than likely my utes got the same thing

[BigRAWesty]

This
1379571943951.jpg
To this
1379572015654.jpg

Gone
1379572037763.jpg

Took it from 2600 tip to tail to just over 1950..

[Ben-e-boy]

Finished putting the winch together, I have an allbright solenoid on the way so I can wire it and then some rope.
The brake assembly on the high mount is testing, I ended up using magnets under the brake which held the bearings in place, I used that spring loaded mechanism and a piece of plate to compress the spring then another clamp to hold the brake pack together while I put the circlip on.
20130919_122520.jpg

I also fitted it to the bull bar and wired in the spotties. I think it looks pretty mean now
20130919_165441.jpg
20130919_173949.jpg

[MudRunnerTD]

Looking good bene

[Woof]

Washed it with soapy stuff, 2nd time in 3 years

[Winnie]

I did not realise you we're going tube bar, looks sweet as!


Sent from my iPad using Motorculture mobile app

[Ben-e-boy]

I did not realise you we're going tube bar, looks sweet as!


Sent from my iPad using Motorculture mobile app

I modified the old bullbar, it looked good on the bench when I put it on it looked like shite, I dont mind it if it looks ordinary, but this was shite, so I bought that bar off ebay

[Rustyboner81]

what ya makin westy?

[BigRAWesty]

Cutting down the roof rack.. Was 2.6m long... That's longer than the q roof...
So down to 1.9m..