Front wheel bearing maintenance

[Ajwood]

Yep mudski
I have all the parts. No probs

I have notices some material wear on the bush. I may need too replace them later. I have greased the drive clutch and the bush as per manual. The work shop manual is great. It give more conference on the work flow.

Thanks again guys for you help. If you want I will post again as I progress.

[Ajwood]

The outer races are in. I used a bit off brass flat same length as the diameter of the outer. Place the bearing making sure is the right up. Place the bar across the bearing and hit the middle of the bar. Rotating the bar every tap. Wala she's home. ImageUploadedByMotorculture1375326984.386252.jpg

[mudski]

Yep mudski
I have all the parts. No probs

I have notices some material wear on the bush. I may need too replace them later. I have greased the drive clutch and the bush as per manual. The work shop manual is great. It give more conference on the work flow.

Thanks again guys for you help. If you want I will post again as I progress.

Sorry mate. What bush are you talking about? I recently did a re race on my U and don't remember seeing any bush.