Good stuff. Was it hard to do? Any special tools required?Originally Posted by mudski
Good stuff. Was it hard to do? Any special tools required?
well finally completed my rear shelf, looks shmick and works well
SHINY AND NEW: 2015 Series 2 Y62 Ti in White. Bone stock, hate to say it but its the wifes car this time.
OLD SOLD:Silver 50th Anniversary Patrol, 2" Pro-Comp Lift, 32" MT ATZ 4 Rib, 9000lb Warn Winch, UH7700NB + BT UHF Brilliant. Ultra Gauge and some GO FAST bits........
Nice job. How much weight can it hold?
enough for coking but wont hold a kid or anything, i used alucabond which is a composite aluminium panel, probably hold a carton easilly...
SHINY AND NEW: 2015 Series 2 Y62 Ti in White. Bone stock, hate to say it but its the wifes car this time.
OLD SOLD:Silver 50th Anniversary Patrol, 2" Pro-Comp Lift, 32" MT ATZ 4 Rib, 9000lb Warn Winch, UH7700NB + BT UHF Brilliant. Ultra Gauge and some GO FAST bits........
Not really hard but time consuming. About three to four hours stripping it all down, about and hour or two cleaning and installing new bearings and seals.
Doing the centre was left to George yesty.
Then went over to BA's place this morning to help him get his centre back in and then over to my place to help me with mine and then we parted ways and finished the reassemble.
The compressor I installed a couple of weeks ago. That was easy.
Oh and a massive, massive thanks to George for his help and to BA's wife for supplying the food yesterday. And to BA for making the coffee.
-----------------
I tapped that app
Last edited by mudski; 22nd July 2013 at 11:02 PM.
Alitis007 (25th July 2013)
Think this one is beyond my skills. Think I will leave the install of the locker to arb.
I already have the compressor installed
Nearly finished the diff lamination.. If only this pita thing called work would back off...
Kallen Westbrook
Owner of
Westy's Accessories
Cheers
Kallen Westbrook
Parksy (23rd July 2013)
Fuelled up today at $1.549 but was lucky enough to fill 150 odd litres using a 40 (yes 40)cent off vouchers. What a saving.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Installed a new bush on the gearshift lever. Big difference in shifting feel. Not as notchy. Much nicer.
BigRAWesty (26th July 2013), mudnut (23rd July 2013), threedogs (26th July 2013)
fitted the airbags on the back and new mono shocks, also swapped the rear springs around to even the body up, i cant beleive that so called professionals cant read or dont know that there are left and right springs its almost perfect now and the ride is much better, no more sea seasickness lol.
PMC (23rd July 2013)
Reply With Quote
