Silvertop gq engine need help

[Newbiee]

Hey guys i have a silvertop engine and have been noticing over the past few weeks that the rocket cover is getting covered in black film, today i was doing a oil and filter change when i noticed whats the cause it looks like a recerulation valve or something along those lines to me could be completly wrong, but it looks like it has blown a hose of, i took some pictures with my phone but its not letting me upload them, its the circle part ontop of the rocker clover closest to the firewall

[threedogs]

May need to fit a catch can and/or block EGR

[Ben-e-boy]

May need to fit a catch can and/or block EGR

It's a silver top... There is no egr and if it is leaking from there a catch can is going to do squat.
That's the crank case vent. It could be partially blocked with gunk and that is the possibly the reason the seal/gasket is weeping.

[Newbiee]

No worries mate thanks for the reply, so its only meant to have the one hose connected to it even though there is two oulets?

[nissannewby]

Where's the second outlet?

[AB]

Why is there a second outlet? Is the second one just open?

Can you take another pic from the other side.

Here's mine...

ImageUploadedByMotorculture1369465192.916157.jpg

[nissannewby]

That hose in the first pic should be on that barb. Also as Ben-e said it might be worth giving it a good clean before reconnecting.

[AB]

Where's the second outlet?

Have a look at the top view photo Matt...very strange.

Take another photo from the other side mate.

[AB]

That hose in the first pic should be on that barb. Also as Ben-e said it might be worth giving it a good clean before reconnecting.

Lol....I thought there were two barbs coming out but looks like the hose isn't connected.

[MudRunnerTD]

Yep hose not connected. Refit the hose. Drive.