Tb42e oil pump

[Parksy]

Hi all

Have the inlet removed and noticed there is coolant seeping from what appears to be the oil pump. Is this an easy remove install job that I can just easily apply sealant and be done, or will things fly off and get lost?
Curious of anyone's experience with this.

Cheers

Andy

[Dales300exc]

Its just an oil cooler. Remove and reseal. May have orings. Interesting that your tb42e has one, mine doesnt, its just a block off plate on mine.

[Parksy]

Cheers! Should I expect coolant/ oil to pour out? Coolant has been drained but might have some residue. Do you have a picture of your setup? Curious to know what this blank looks like.

[Dales300exc]

Probably a little of both. Did you drain the block? If you didnt you will get lots! Haha.

ImageUploadedByTapatalk 21366516762.337313.jpg

Hard to see but the plate has orange sealant around it and the filter goes straight onto the block.

[Parksy]

Cheers mate. Big difference, pleasant surprise on my behalf though. Thanks for the good news!