Outback Ideas Recovery points

[threedogs]

Sorry but can't copy another persons product, just can't do it.
I know a shite load of shops copy mine but that just shows what their integrity and thought process is all about. $$$$$$$$$$$$$$$$$
Nah I'll stick to doing what I do, coming up with ORIGINAL ideas and products

[Yendor]

Apparently it's not copying if you change the colour.

[NissanGQ4.2]

Sorry but can't copy another persons product, just can't do it.

There is nothing wrong with copying someone's product if you can make it better, its only wrong if its the same or worse than the original

[threedogs]

Get the changing colour bit, gee that fooled me, lmao.
just thieves no other term.Whats wrong with that product?? not strong enough?
roll pins fail? I only have 54mm socket job, good price does the job[ wheel bearings}

[NissanGQ4.2]

Get the changing colour bit, gee that fooled me, lmao.
just thieves no other term.Whats wrong with that product?? not strong enough?
roll pins fail? I only have 54mm socket job, good price does the job[ wheel bearings}

not sure mate mine works fine, not a tool that gets used very often

[Rip'n'Shred]

I received my recovery points before the weekend. Thanks threedogs. Top quality product mate.

Line up perfect, very well designed to minimise underhang, even the power coating is spot on. Highly recommend to everyone.

Thanks again.

[Agronaught]

Bought the outback ideas recovery point for the TB48, nicely made but im scratching my head as to how to mount it effectively.

ImageUploadedByTapatalk1354506839.059526.jpg

As far as i know its meant to be mountable with the factory alum bar, but crawling under the car and aligning the point where i think it belongs (could be wrong) and theres a problem.

ImageUploadedByTapatalk1354506951.158957.jpg

The bracket from the factory bar interferes with the recovery point:

ImageUploadedByTapatalk1354506994.028181.jpg

So.. Any suggestions on how i mount these babies, i originally thought i may be able to samdwich the rp between the chassis rails and the factory bar mount, not so sure now.

[threedogs]

Hi mate, what bar it that you have, where you have them do you have 2 captive nuts under the chassas on both sides??
Long distance guessing is not a strong point of mine. Looks like the folded ones I make would fit, but pic would be nice If you can get one
of under the chassis, they won't fit dont even Try.
Try outside of chassis, factory tiedown point is now a mounting hole,

[Agronaught]

Factory bar as shown

ImageUploadedByTapatalk1354509003.708883.jpg

The only trapped nuts i can see are a fair way back near the cross member

ImageUploadedByTapatalk1354509061.285120.jpg
ImageUploadedByTapatalk1354509081.631571.jpg

I think the usual mounts are used by the radiator guard

ImageUploadedByTapatalk1354509160.757478.jpg

[threedogs]

Just check mine again, Hold on for a tick. Pic stll looks funny to me,
Do these look like they would fit??????