Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Took the swing arms off to have some caster correction bushes fitted, when I took the drivers side off I thought the chasis nut came off easy or more accurately quickly.
Had the bushes fitted and put it back togeather doing the passenger side 1st. When it was tightened up the thread on the chassis end came through the nut 15-20mm.
Did the drivers side and when the nut was tight the thread was flush and the new rubber bushes were not compressed like the other side.
It was a cow of a job to get back off as the thread had spalled as you can see, what a pita.
I am taking the arm into Nissan in the morning to get the end replaced, I hope its not going to be a hassle.
A mate said ages ago my 4B looked like it was crabbing, this would do that.
The mechanic who had the arms out before is now off my "touch my truck" approved list!!!!
Reply With Quote