hi team
just purchased some bridgestones & feel like running at to low a pressure
dealer had them at 35 psi but i still feel gripping up to much (not standing up)
had some aPerellies at 36 psi no problems.
i have afreind with a Cruiser that runs ate 50 psi
any advise would be great as these tyres are costly & can feel money being left on the road
cheers
Welcome to the forum mate. What brand and type of tyre are they (mt, at etc)
In the words of a Dhuck "QUACK".
No idea mate but try this site: http://www.bridgestone.com.au/tyres/.../pressure.aspx
285/70/17 AT's mate
What brand mate as different manufacturers have different pressures.
In the words of a Dhuck "QUACK".
I think most 4x4 tyres are supposed to be run at 40-45 psi for normal tarmac driving. I could be wrong and please tell me if I am, but I have run under this assumption for over 20 years with no ill effects. At the moment I run my 65 series ProComps at about 38-40 for a bit of comfort and have not noticed any abnormal wear.
Mrricsta25 (16th January 2011), timbar (18th May 2011), WORTHOS6 (7th January 2011)
thanks ecrusty
i am running them around 40psi a little better but still not happy will try them at 45 mate
I run 40 PSI in all the 4bys,and 50PSI loaded
Run 40psi in my BFG a/t
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Some can take 60 psi with no heat probs or any distorion probs. Check the rating on sidewall.
Getting Older Is Unavoidable, Growing Up Is Optional!
Posting Permissions
Reply With Quote