GQ Petrol Air Filter Box (Housing)

[Bigrig]

G'day all

quick one - anyone know where I could get my hands on a replacement air filter box for the GQ? As per most that are on LPG, mine backfired at some stage and has blown the guts out of it ... now I'm getting the snorkel fitted next week, and not much point having a snorkel when the water will just flow freely straight into the bottom of the air box that is there!!

I've tried patrolapart in Melbourne, some wreckers and about 3 companies advertising Nissan parts on eBay, but alas to no avail. I did hear of someone out there doing specialised air filter boxes in stainless specifically for cars on LPG, but can't find reference on the net anywhere. Apparently one from a VN commodore will slot in with some 'minor' tweaking, so that is an option also - if anyone has retro-fitted one, can you let me know what make/model it came from and what you had to do to fit it.

Thanks a million in advance.
Scotty

[Bigrig]

Righto - after ringing about 25 wreckers and sending off about a dozen emails to online distributors (even overseas) I've resolved myself to the fact that if anyone wants an air box for petrol GQ, then fork out $484 to Nissan for one!! No joke, for a molded piece of plastic!!!!

Sooooooo ... being the stubborn individual I am, I did a bit of research and as it turns out, you can retro-fit the air filter from a VN (VP, VR or VS also for that matter) Holden ... measured up my box today, went to the wrecker and measured up the Holden one - same size essentially, just needs a bit of tweaking to get want I want - primarily, the top outlet pipe hole on the holden one needs to be filled with a new hole placed further back in the assembly (it fits, and has to be done due to my Air Con lines), the original hole will get the full treatment being plated both sides for strength and about 74 kilograms of silicone!!! lol ... the inlet pipe is in the right spot, but is rectangular, and I dont know the last time you guys checked, but a round 95mm pipe doesn't fit that neatly onto a 80x50mm rectangular hose ... go figure!!! So some surgical work required there to graft a pipe together also ... other than that, the spare part cost me $25 and I'm going to 'share' the labour of customising the box, so expect it might cost another $80-100 ($125 fitted in total as opposed to $484 - I'm ok with that!!!). I'll post some pics once I start and let you know how it fares.

Ciao for now

[sweet_gq]

yeah - too late for me. Paid $450 for new airbox before I found out about the commodore option. I did Cape Tork this year so I didn't want to skimp with all the river crossing we did.

I did research the LPG backfire - I am now a NAZi with my sparkplugs, always colder the spec and with a wider gap - 1.1 instead of .8/.9. I only run high octane fuel so detonation isn't a prob. Helped with fuel economy on the lpg as well.

B

[Bigrig]

Thanks mate - sent you PM about the setup for LPG also - the new air box is being built to be INDESTRUCTIBLE ... maybe ...

[sweet_gq]

yeah, i have seen a few being home made on forums out of alloy etc that look awsome. I will probably wait until i blow this one up before i make one out of cryptonite...

sent reply.

B

[Bigrig]

Same goes - heard about the alloy ones, but can't locate them anywhere, found some information regarding the build of this one (out of the VN - VP, VR and VS are all the same also), so hopefully pretty straight forward ... hopefully!!!

[lostgirl]

I am actually looking replace mine as my car is idling badly and is backfiring continually. Did you have any luck with getting one.

[Finly Owner]

He sure did. It's a wonder he didn't put pick up here. He is on Hols at mo, so Scott should be back soon.

Tim

[NissanGQ4.2]

I am actually looking replace mine as my car is idling badly and is backfiring continually. Did you have any luck with getting one.

Courtesy Of BigRigs Thread, its in there somewhere: http://www.nissanpatrol.com.au/forum...y-and-Ugly-../

Air Box Modification (VN Commodore Modified Box)

Well, it took some effort for the boys who installed it, but still worked out heaps cheaper than getting one through Nissan and as per the photos, whilst it looks like Frankenstein, it's probably stronger!! lolol ...

You can see where they blocked up the outlet on the top to rejoin the stock Nissan one, and same goes for the rectangular inlet on the bottom (plated up) and moved to the front. Nothing you can't do with a a bit of zincanneal and a kilo of sikaflex!! lolol ... They also removed the hose/line mounts etc from the old box and pop rivetted onto the retro fitted one to keep it clean ...



You can see the balance pipe on the inlet below for LPG/Snorkel setup (5/8 connection/pipe) from the top of the inlet to the back of the mixer.




The one below where they blocked up the rectangular inlet from the VN to move it to the front ...

[Finly Owner]

Thanks todd you the man