Next the air filter box needs some modifications Basically cut off the bend bit and then cut off the square end, as that bit will be in a new position on the box.
Then I grafted on the square bit onto the box and riveted it in place , again using tiger seal to seal it all up.
Then I cut a bit of old tread plate to blank off the old intake hole. Again, rivets and tiger seal do the business
Refit the filter box back on the Trol
Here you go , plastic pipe back in place and it lines up a bloody treat
Next stage will be the silicone hose connection and then routing it through the dash and up the A post.
It'll then go onto a roof scoop made out of a bonnet scoop like a scooby or similar
Watch this space for the next instalmen
Reply With Quote