Sounds like you need 2 notch the floor pan out or modify the selectorOriginally Posted by BigGQWesty
Sounds like you need 2 notch the floor pan out or modify the selector
Last edited by NissanGQ4.2; 30th September 2012 at 07:22 PM.
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
If I notch the floor the boot won't fit then.
It has 12mm gearbox spacers under it to correct the lift, so I might try remove that first. If not I might try adjust the linkage.
Sent from a device which doesn't always agree with my thumbs...
Cheers
Kallen Westbrook
Took 150ml of rear diff oil out and added 150ml of engine oil flush. It's worked for others so here goes ;-)
Double Tap
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
It wasnt today but I did get it quite dirty, took about 4 hours with the gerni and its still got crud stuck in nooks and crannies
Cheers
Macca
Today, I picked up and fitted a Tigerz11 Grande 12,000lb winch, and over the past few weeks I have fitted a genuine steel winch bar, rated recovery points to the front, make and installed a table for the rear door, fiited LED lights over the table and into the awning, and last but not least fitted a rear work light.
Got some blue spotlight covers, huge mod lol.
Ordered my 55w HID kit for my IPF900 bar spotties with internal ballasts. But unfortunately I cannot get HID kit with internal ballast for my 5 x IPF808 on the roof rack and don't really want to fit externally on the rack.
Sent from the secret chambers of our secret society, on a secret iPhone, with a secret pin code and eye retina scanning from a secret peep hole, just don't tell anyone OK, cos it's secret........
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Copy cat I also ordered some 55W HIDs for my spotties, no way to mount them internally though.
Mego how come they wont fit???
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Although I haven't looked into it myself, the guys I bought the kit off reckon there just isn't enough space inside the housing of IPF808's for a ballast and wiring to convert. Only using ballast externally. ImageUploadedByTapatalk1349432281.608754.jpg
Quite a skinny spottie
Sent from the secret chambers of our secret society, on a secret iPhone, with a secret pin code and eye retina scanning from a secret peep hole, just don't tell anyone OK, cos it's secret........
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Reply With Quote
