Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Fitted my ARB recovery point this weekend. I have a 2010 GU7 with factory steel bulbar. Here are a few pics of the installation..
A few notes:
- Have cut a bit of the plastic part of the bash plate to fit the recovery point. The horizontal steel part of the bash plate also needs a bit grinding off before I fit it back on. I might have a look at some after market bash plates instead .. the instructions that come with the ARB recovery point have a template cutout to modify the ARB bash plate to fit the recovery point.
- I also had to file then drill out the three holes on the vertical chassis rail with a M14x1.5 tap drill as there were a few tack welds that had blocked the holes slightly.
- Torque spec was 121 Nm for the 5 bolts.
- May lose a small bit of approach angle on the right hand side, but its only for that small area. I haven't measured it yet.
Reply With Quote