The kits for the GUs now come with full colour pictures and step by set instructions.
Cheers Mick.
The kits for the GUs now come with full colour pictures and step by set instructions.
Cheers Mick.
wouldnt mind a set for the GQ but I'm not competent enough to have a go myself................. looks bloody good Mick
The GQ kits I do all in house so all you need to do is fit the whole light to you 4wd and fit the wiring loom which is almost plug and play. I cut the light, fit and align the projector and fit the lens back on.Originally Posted by Clunk
This is how they look when you get them.
Cheers Mick.
How much for 2 of those? Do they like water?
I'm really tempted.
There more water proof then most lights as there fully sealed but like every light they all have a little breather on the top of them which I don't seal off. You would have to be under water for them to fill up though the breather though.
All the prices and options are at the start of this thread.
Cheers Mick.
So if i'm reading the pricing correctly its as follows for a GQ
$300 for the the projector kit (per pair?)
$100 for the inserts
$50 for the boots........ sorry not sure what these are exactly, so you'll need to enlighten m.
$150 for your labour and trubles
So looking at total $600 for the pair?
Oh and must forget extra for freight I guess?
Please correct me if im wrong........... could be an option as long as the good old tax man is kind to me this year, otherwise may take a little while longer
The boots are CV boots which cover the back of the projector and help seal it from water and dust. You'll see what I mean in the picture below. $600 will cover everything but freight.
Cheers Mick.
After a lot of enquiries about devils eyes I now stock them to suit the 3 inch projectors in Red, blue, purple, green and yellow. These are a full halo like the angel eyes only they fit behind the projector. There $50 a pair with the drivers to run them. It's the blue in the centre of that light which is the devils eye. It's the only picture I have of them at the moment as I've never installed them yet. When I actually install a few I'll get some better photos. I think the above picture is to much colour and makes them look cheap but with just the red or blue in the centre they do look nice.
Cheers Mick.
Hi Mick,
Have sent a PM.
Cheers,
Tim
2012 GU8 Polar White Auto ST Patrol, Factory Bull bar, Scangauge 2, EGR blanked, Milford cargo barrier, Outback ideas recovery points, Micks retrofit HID 3 inch projectors with Osram bulbs and 55w ballasts, GME TXE3420, Sidewinder dual battery with monitor, Windcheetah 2.0m alloy rack, Suspension Stuff 2" Flexy lift with SS Monotubes, MT ATZ 4 ribs 265/75R16 on black Dynamic rims, Custom rear draws with fridge slide.
No dramas mate I just replied.
Posting Permissions
