Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
This is slightly dodgy but you can run it through the holes in the back left top corner (passenger side) of the engine bay and tap into the large grommet that runs the wires for the passenger door into the vehicle. Then run it as normal inside...
I can assure you that the door will not be in the way of the wire, just make sure there is no slack from the engine bay into the vehicle as you are making a slightly curved set up.
Reply With Quote