Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Put the old rotor button back in and see if that makes any difference, also check for sideways movement in the dizzy shaft, and make sure the new points are not bottoming out. did you clean the laquer off the new points?
re check the points gap and dwell angle.
Check that the little spring loaded carbon pin inside the top of the cap hasn't worn down, it must contact the top of the rotor button.
Try another condensor while yer at it.
Cheers, the ferret.
Reply With Quote