OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: LPG Air Filter Setup. A Danger??????

  1. #1
    Advanced knightpatrol66's Avatar
    Join Date
    Apr 2012
    Location
    Wyalkatchem WA
    Posts
    56
    Thanks
    36
    Thanked 5 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    LPG Air Filter Setup. A Danger??????

    Hi All,
    My Mechanic pointed out to me recently that my current setup ( Impco 300A ) with the bare filter beneath it could actually be a danger. Apparently if there is a backfire from the Gas there is a risk of it catching fire...??? Has anyone else heard of this or can confirm that this is possible? If I were a rich man I would simply rip the LPG out and install a nice long range tank for Petty back there, but the cost of ULP is'nt getting any cheaper...then again here in Kalgoorlie the LPG is at $1.08 p/litre, bit rough when Perth's average is 72-77 cents per litre......I would love to simply have the bare mixer on top of carb with a decent pre-cleaner set up of some sort....If there are any LPG Members that have done this would love to hear from you. Cheers all.............AJ
    Attached Images Attached Images

  2. #2
    Patrol God taslucas's Avatar
    Join Date
    Aug 2011
    Location
    North West Tas
    Posts
    10,804
    Thanks
    3,366
    Thanked 6,886 Times in 3,670 Posts
    Mentioned
    56 Post(s)
    Tagged
    1 Thread(s)
    here is a pic of mine, it has a cylinder type filter all done by the previous owner. Notice the filter is a fair way away from the carby.
    (Dont worry, i have replaced the dodgy flexi pipe snorkel!)
    Attached Images Attached Images
    Hello from Under Down Under!

  3. The Following User Says Thank You to taslucas For This Useful Post:

    knightpatrol66 (11th June 2012)

  4. #3
    Advanced knightpatrol66's Avatar
    Join Date
    Apr 2012
    Location
    Wyalkatchem WA
    Posts
    56
    Thanks
    36
    Thanked 5 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    hey Mate Thanks for replying. That's a good setup ( less the dodgy Pipe You wouldn't happen to know what that Filter Canister is off would you?

  5. #4
    Patrol Guru
    Join Date
    Apr 2011
    Location
    Melton
    Posts
    882
    Thanks
    47
    Thanked 209 Times in 172 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have a ring mixer sitting above mt carby on the rb30, simalar to tacus setup.

    I have not heard of anu one having a problem with the impco mixer setup
    1991 GQ LWB 4.2 Carby dual fuel, 32 mud claws, 2 inch lift, LSD's front and back

    And its Toooooooo High for the Ball & chain

  6. The Following User Says Thank You to GQ TANK For This Useful Post:

    knightpatrol66 (12th June 2012)

  7. #5
    Advanced knightpatrol66's Avatar
    Join Date
    Apr 2012
    Location
    Wyalkatchem WA
    Posts
    56
    Thanks
    36
    Thanked 5 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Not many have said anything MK, but I guess if i'm to put a snorkel on Jonah eventually I'd best be looking at something like the Millweld setup so I can seal the system completely.

  8. #6
    Advanced
    Join Date
    Apr 2012
    Location
    NE victoria
    Posts
    44
    Thanks
    0
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    hey knightpatrol im a newbie too but have seen heaps of setups like ours and ive never heard of one catchin fire but im sure there is a few stories out there of a mate of a mate who heard of someone who did ,also like me today playing with the fuel mix and had fuel leaking over the top of the carby then switched it to gas what was i thinking not too smart but i am on pain drugs that dont help the mind much.
    that setup (carby) is the same as mine i was wondering the little black box that runs the gas on yours may be located somewhere near the gas converter if it was the brand ELCO 1SSE if it is could you do me a favour and tell me how the gas tank is wired to the gauge on the tank , i have three wires two to the solenoid on the tank and a third which becomes live with 12 volts when car is started on gas i assume its for the gas gauge no idae if its the left or right terminal and what the other wire was i suspect it was just an earth wire have had a lot of trouble getting info on this and yours is the same carby so thought i might ask cant hurt .
    ps the fourth wire is missing thats why im guessing it was an earth.

    thanks mudmav
    Last edited by mudmav; 12th June 2012 at 02:00 AM. Reason: add on

  9. #7
    Patrol God taslucas's Avatar
    Join Date
    Aug 2011
    Location
    North West Tas
    Posts
    10,804
    Thanks
    3,366
    Thanked 6,886 Times in 3,670 Posts
    Mentioned
    56 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by knightpatrol66 View Post
    hey Mate Thanks for replying. That's a good setup ( less the dodgy Pipe You wouldn't happen to know what that Filter Canister is off would you?
    yeah its off an, er, um.......Gutlux!! lol there i said it!

    Also worth checking out Donaldson filters. They specialise in similar aftermarket setups. I havent had a good look at the site, but here it is:http://www.donaldsonfilters.com.au/
    Hello from Under Down Under!

  10. The Following User Says Thank You to taslucas For This Useful Post:

    knightpatrol66 (12th June 2012)

  11. #8
    Advanced knightpatrol66's Avatar
    Join Date
    Apr 2012
    Location
    Wyalkatchem WA
    Posts
    56
    Thanks
    36
    Thanked 5 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    No wuckers Mudmav give me a chance to have a bo-peep and i'll get piccys and details for you tonight

  12. #9
    Advanced
    Join Date
    Apr 2012
    Location
    NE victoria
    Posts
    44
    Thanks
    0
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    thanks knightpatrol will mean heaps to me and save a heap of mucking around , have loked and looked but chucked it in after about five hours of computer searching some things are easy to find some well not so .have a tech guy from impco supposed to get in touch so i may be able to get my idle prob sorted and if you come through with the tank gauge wire setup i will be one happy little vegimite.

  13. #10
    Patrol Guru
    Join Date
    Apr 2011
    Location
    Melton
    Posts
    882
    Thanks
    47
    Thanked 209 Times in 172 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    The little box should be your LPG safety switch.

    The safety switch will have a sense wire going to the coil.

    A wire going to the gas relays (on the lpg tank & int the engine bay)

    There should be a ground, volts - may be going to the gas / petrol switch.

    The switch will only activate the gas relays if there is a pulse on the sense wire - ie the truck is starting or running. Once the trucks turned off the gas relays are turned off.
    1991 GQ LWB 4.2 Carby dual fuel, 32 mud claws, 2 inch lift, LSD's front and back

    And its Toooooooo High for the Ball & chain

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •