OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 2116

Thread: Merged - Deleted "Wanted"

Threaded View

  1. #11
    Advanced Dingo55's Avatar
    Join Date
    Feb 2012
    Location
    Brisbane
    Posts
    98
    Thanks
    34
    Thanked 21 Times in 20 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Patty, I measured a '03 & '06 GU today both STs. The rear qtr & flares are the same, the distance of the flares & tail lights from the top of the bumper is the same. The bottom of the tail lights on the '03 & '06 start at the same place on each body but the '06 lights extend higher on the rear qtr panel. Only difference is the full plastic bumber covers the center break away U bolt - won't call it a tow or recovery point because it's not. If you fit an '04 or newer plastic bumper on an '03 or earlier, then you would need to fit the extension piece in the centre of the rear subframe, otherwise you won't be able to bolt on that break-away U bolt. Have a look at the attached pdf, page 2 & look for that additional piece - part # 51132. Morton's trol won't have that part. I think it was introduced from '04 onwards.

    cheers
    Attached Files Attached Files
    Last edited by Dingo55; 21st May 2012 at 07:11 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •