OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 14

Thread: Aircon Pulley..doesnt like water...

Threaded View

  1. #8
    Banned
    Join Date
    Apr 2011
    Location
    Greenbank QLD
    Posts
    3,387
    Thanks
    561
    Thanked 1,547 Times in 1,116 Posts
    Mentioned
    25 Post(s)
    Tagged
    1 Thread(s)
    Yes you can replace the clutch on the A/C compressor, if you can get a new one.

    Normally what goes wrong is there becomes to much air gap between the clutch plate and pulley face and the clutch starts slipping when the A/C is on.

    Remove the clutch plate, there should be a shim behind the clutch plate. If you are lucky all you need to do is remove this shim, clean up the clutch plate and pulley face and reassemble.

    If there is not enough air gap when the shim is removed the clutch will drag when the A/C is off, you will need to try fitting different sized shims.

  2. The Following 2 Users Say Thank You to Yendor For This Useful Post:

    Airstrike (26th February 2012), Robo (26th February 2012)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •