Nice Design mate! Haven't seen that done before.
I have 6x9's in my Troll atm but I just have them in speaker boxes screwed to a shelf. Pain in the butt!
Nice Design mate! Haven't seen that done before.
I have 6x9's in my Troll atm but I just have them in speaker boxes screwed to a shelf. Pain in the butt!
ozzyboy (5th April 2012)
Very very nice, can I book you in @ the QLD meetup
Does the drivers side speaker sit further forward than the passengers??? and why is the board cut shorter on the passenger side????
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Yes and yes :POriginally Posted by NissanGQ4.2
Very very nice, can I book you in @ the QLD meetup
Does the drivers side speaker sit further forward than the passengers??? and why is the board cut shorter on the passenger side????
I played around / got it wrong at first. Having a toddler who loves coming for a drive with dad, i wanted to keep access to the child seat latch. Also the amp is on that face side, which throws of a fair bit of heat. so i um ... gave it room to breathe. ( thats my excuse and i'm stickin with it lol ) :P
I was thinking wether or not to even them up, but a longer drawer on drivers side beat what it looks like/ save dead space so i stuck with it.
cheers
small touch ups tomorrow and drawers complete.
Total cost for drawers = $63.80. plus spent some getting wiring done for stereo
[IMG][/IMG]
Thats a very nice looking setup mate. Very neat
Hello from Under Down Under!
ozzyboy (16th February 2012)
Cracking job Oz!!! Come up an absolute treat!!small touch ups tomorrow and drawers complete.
Total cost for drawers = $63.80. plus spent some getting wiring done for stereo
[IMG]
ozzyboy (16th February 2012)
Looks great mate, love the draw set up.
Cheers Steve
Dents are like scratches with better stories.
http://www.nissanpatrol.com.au/forum...udducks-tourer
ozzyboy (21st February 2012)
Hey Ozzyboy. great looking drawers you have made. You have inspired me... one question? did you use drawer runners/slides or did you just make the drawer a tight fit??
Thanks Mate
cheers mate. No draw runners as i tried keeping a budget under 100 bux. the formply slides laminate on laminate.
what i did was keep the drawers free from the side walls by approx a inch both sides, incase i changed mind and wanted to run slides / bearrings.
The face of the drawer ( where the handles are) i made tight to stop from sliding (mostly works :P )
ozz
[IMG][/IMG]
Posting Permissions
Reply With Quote