Help!!!! keys locked in car

[Yendor]

I think you have the harness that just goes to the indicators in the guard.

I just had a look at my series 4 and it would be very hard to see the door harness when looking from the front wheel arch with only the plastic inner wheel arch guard removed.

[Ian2011]

Turns out its the loom for side indicators and arial

[Ian2011]

yendor,

before I go pulling archs out, will I actually be able to get to the loom or should I just get the screwdrivers out and as most suggested do it the old fashioned way

[Yendor]

yendor,

before I go pulling archs out, will I actually be able to get to the loom or should I just get the screwdrivers out and as most suggested do it the old fashioned way

On my series 4 I don't think you will be able to get to the door harness without removing the guard and to remove the guard you need to have the door open.

[Ian2011]

nice, looks like old fashioned way then

Cheers

[Yendor]

Just take your time and use gentle pressure when prying the door frame out.

[Clunk]

Sounds like it time to to get a second set made up................. sorry mate I'm no help as always, I've just called the RAC when that's happened

[Ian2011]

Thanks all for the advice, all I can say is that after two beers, over 200 expletives (not to be said in front of the kids), I have managed to get in with the help of the old trusty coat hanger, now I just have tio figure out the original problem

Cheers

[Yendor]

That's great news, good stuff.

[NissanGQ4.2]

Thanks all for the advice, all I can say is that after two beers, over 200 expletives (not to be said in front of the kids), I have managed to get in with the help of the old trusty coat hanger, now I just have tio figure out the original problem

Cheers

Is that all......told you 2 just do it the old skool way, so much easier than mucking around with remotes *L*