The "Tank" - Big, Grey and Ugly ..

[Dark 1]

Wow you got your own rock crawling track in your backyard Scotty you are a committed 4 wheeler aren't you?

[Clunk]

looks good mate.............. on another note, did you end up getting those one pice frameless rear windows?

[Ben-e-boy]

I love Flex..... If your worried about the spring falling out, Go to the steel supplies before the working bee get a meter of 10mm solid round bar ( couple of bucks) and I'll knock you up some drop out cones same as mine at the working bee and (i'll ask this week ) I may be able to get u a deal on coil retainers. but give me a couple of days

[Bigrig]

looks good mate.............. on another note, did you end up getting those one pice frameless rear windows?

They'll be the week after next mate - will post an update on them also.

[Bigrig]

I love Flex..... If your worried about the spring falling out, Go to the steel supplies before the working bee get a meter of 10mm solid round bar ( couple of bucks) and I'll knock you up some drop out cones same as mine at the working bee and (i'll ask this week ) I may be able to get u a deal on coil retainers. but give me a couple of days

You're a good boy!!! Will do ...

[Ben-e-boy]

make sure you bring a welder. Do you have electrodes?? I have 16tc's have you used that type of elctrode before

[Bigrig]

make sure you bring a welder. Do you have electrodes?? I have 16tc's have you used that type of elctrode before

Bringing the welder, but edumacate me on the electrodes?

[Ben-e-boy]

Bringing the welder, but edumacate me on the electrodes?

long story short professional welders use 16tc. they do everything except verticle down. I got mine from a boilermaker because I fixed his grinder and I started to learn to weld with them they are a prick to weld with until you get the knack. macca86 should be able to back me up on this

[Clunk]

They'll be the week after next mate - will post an update on them also.

ahhhhh good stuff

[Bigrig]

long story short professional welders use 16tc. they do everything except verticle down. I got mine from a boilermaker because I fixed his grinder and I started to learn to weld with them they are a prick to weld with until you get the knack. macca86 should be able to back me up on this

I'll have to have a squiz ... thanks mate