They have the long travel shocks in also that you were after ...Originally Posted by Dhuck
Attending - Yes - Either Saturday is good for me
Attending - Yes - Saturday 24th September
Attending - Yes - Saturday 8th October
Attending - No - Simply can't make it - sorry lads!!!
Attending - No - I'm as yellow as a custard factory and am afraid to ask!!
Good With - Engine and Mechanical
Good With - Auto Electrics
Good With - Transmission/Transfer Case etc
Good With - Suspension
Good With - Assorted Other
Good With - Beer Opening Only
Good With - BBQ'ing Extraordinaire
They have the long travel shocks in also that you were after ...
mmmmmmmmm will have to come up with some $$$$$$$$$$$$$$$$$
In the words of a Dhuck "QUACK".
a 12 inch shock with that bump stop extension of yours will go straight in
96 GQ coil/Cab
08 G6eT
too late to sign up?? i am looking at fitting my dawes value. possible catch can. Would love to see how others have done it.
ScottyB
Scotty B | Take it Off Road or Take it Back
3.0L GUIV 2005 - TIG Welded Intercooler, NADS, Redarc Dual Battery, Additional rear power socket, 2" Lift (Ironman constant load foam cell), Electronic Trailer Brake Controller, Steel Bullbar, 12,000lb Winch, UHF
More the merrier mate - come along, meet a few people and get a hand with what you're looking to do ..
So far I think it's:
Scotty (BigRig)
Dave (Dhuck)
Benny (ben-e-boy)
Adrian (Hekarewe)
Rodney (Yendor)
Scotty (Scotty83)
Steve (Frenzy)
Ryan
Steve (Macca)
Jason (Peacemaker)
Murray and Dave of course (Torq4x4)
And possibly Nick (nickpeacock36), Tim (Cadbury) who are going to let me know, and a few others who are yet to respond (Mal, Steve 04OFF, Gav GUtsy Ute, Tony YNOT, etc).
And that's with Chris (Chrissey), Steve (steve67au), Tim (Finly Owner), Blair (Blazza), etc unable to make it!!!
Nice effort lads!!! Should be a cracking day of top productivity on the rigs ...
I only want to do the rear seal on my transfer case, so apart from about 1.5 hours, I'm free labour for the rest of day - we'll have a great range of capabilities there (including the beer openers and bbq'ers!!! lol) so should be able to knock over a fair bit of stuff on your trucks!!!
Can't wait!!!
this trip I'm after greasing undercarriage rust proofing ( what do I need to do such a task? just fish oil or other things?) and fix my exhaust not sure if it needs welded or just new bolts or flange and gasket
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of themselves without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honour.
I'm bringing HTB grease, grease gun, and a range of tools, as well as a new seal for the transfer case, etc ... just bring the parts, oils etc u need mate, and the labour will be sorted ...
I'll bring the arc welder if wanted unless someone has a small portable mig ...
Cool that's all I'll need might ask work if I can borrow the tig i welding on exhaust is needed.
I am unsure as to what is needed to rust proof can someone let me know so I can buy the right parts paints thinners etc. I have spray gun and assume compressed air will be at the shop
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of themselves without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honour.
Can you tig weld?? you'll have to teach me. its been on my to do list for a long time
96 GQ coil/Cab
08 G6eT
I did it at tafe while I was doing my boilermaker apprenticeship. I've only done mild steel not stainless and aluminum But I can bring my tafe welding books for mig tig and stick for those who want to read up on some theory
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of themselves without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honour.
Posting Permissions
Reply With Quote