I've never seen the correct tool if there is one. A 1/2" breaker bar is all I have ever used, it's not the right size but it does the job. Always take the fill plug out first, you don't want to get caught with the oil drained out and no way to refill it.
Tony
PT Paul (2nd July 2011)
Same as Tony, I have only ever used 1/2" breaker bar, does the job
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
PT Paul (2nd July 2011)
what kind of k's are on ya truck???? might want to change the o2 sensor (bosch part number 0 258 986 501) there a single wire sensor and should be changed every 80,000kms
Dads your not alone http://www.dadsindistress.asn.au/www/home/
PT Paul (2nd July 2011)
You guys are awesome. Just a follow up on the diff/transfer socket thingy. Found Company in USA called Ultimate tool co. They have a 13mm square socket for diff and a 17mm for transfer fill. Made in Japan for Nissans! Cost landed is $30.ooea AUD. I'll tell you how they go.
YNOT (10th July 2011)
used the 13mm socket from ultimate tool co and it works perfect.
YNOT (31st July 2011)
Posting Permissions
Reply With Quote