Loosening a stuck nut...

[YNOT]

Mate take note of what Paul and Tony have written.

I note that you only have 1 post so not even sure you are still about??

I have to say that my last resort for undoing stuff is one of these EzyWrenches from KCI



http://www.kcimports.com.au/item.php?i=31#gallery

Mate i have never found a nut that i could not undo with that little gem. I have cracked an Alternator Pulley while resting the Alternator in my other hand without holding the pulley...CRACK!!! and your done.

Big Winner for me.

He's already tried an electric rattle gun.

Tony

[TUR7LE]

U could try a toque multiplier I think wurth sells them ... I have one at work n can undo truck wheel nuts with a 1/2 " breaker bar with ease ... If u can't do that try hitting the nut with a big hammer while u are trying to undo it .... Or simple use the gas axe n cut it off

[MudRunnerTD]

yeah Tony i reckon he meant a conventional plug in Rattle gun that delivers the same as a pneumatic one. These Ezy Wrenches are Nothing like a conventional rattle gun. They will smash it mate. cant imagine being able to deliver the brake he needs any better

[MudRunnerTD]

when he mentioned an electric Rattle gun i was thinking about something like this



http://www.ebay.com.au/itm/240V-IMPA...ht_6044wt_1141

or one of these but they are a little dear to have a go with

http://www.ebay.com.au/itm/DeWalt-DW...d#ht_696wt_907.

The EzyWrench pictured in my previous post delivers the impact like a single hit impact driver you hit with a hammer.

Tony if you have never use one of these you HAVE TO get yourself one mate.

The first time i pulled the trigger on one my father in-law had bought it and i thought...yeah right! Tssssssss! Junk, then it went bang and i could see the potential.

It is an animal mate. eats the toughest of jobs with ease. I have a couple of significant rattle guns and when they both fail i get this little thing out to show em up.

Best describe for the action of these is...

Pull the trigger......

it make a long spool up sound...Wwwhhhhhuuuuuuuuuuuuuuuuuuuurrrrrrrrrrrrrr rrrrrrrrrrr................BANG!!!! CRACK!! job is complete.

Rather than the Rat...Tat...Tat...Tat...Tat...Tat...Tat.. bouncing off the bolt.

if it needs more then just hold the trigger in and it will spool and bang, spool and bang, spool and bang until the job is finished. Crazy!

[patch697]

when he mentioned an electric Rattle gun i was thinking about something like this



http://www.ebay.com.au/itm/240V-IMPA...ht_6044wt_1141

or one of these but they are a little dear to have a go with

http://www.ebay.com.au/itm/DeWalt-DW...d#ht_696wt_907.

The EzyWrench pictured in my previous post delivers the impact like a single hit impact driver you hit with a hammer.

Tony if you have never use one of these you HAVE TO get yourself one mate.

The first time i pulled the trigger on one my father in-law had bought it and i thought...yeah right! Tssssssss! Junk, then it went bang and i could see the potential.

It is an animal mate. eats the toughest of jobs with ease. I have a couple of significant rattle guns and when they both fail i get this little thing out to show em up.

Best describe for the action of these is...

Pull the trigger......

it make a long spool up sound...Wwwhhhhhuuuuuuuuuuuuuuuuuuuurrrrrrrrrrrrrr rrrrrrrrrrr................BANG!!!! CRACK!! job is complete.

Rather than the Rat...Tat...Tat...Tat...Tat...Tat...Tat.. bouncing off the bolt.

if it needs more then just hold the trigger in and it will spool and bang, spool and bang, spool and bang until the job is finished. Crazy!

I think I want me one of these.......

[Clunk]

yeah I could do with one of those to loosens up me nuts too....................

[nowoolies]

yeah I could do with one of those to loosens up me nuts too....................

its the rattle your after hahahahahah

[patch697]

You 2 Pee off back to N/S & stop highjacking.......GRRRRRRRRRR..................... ..LOL

[Mrowka]

"Give me but a lever long enough and a place to stand and I will move the earth!" - Archimedes

[GUte]

Forgive me for being naive but I fail to understand how this would work when the front shaft needs to be removed in order to access the nut being referred to above?

I assumed he was talking about the flange nut on the transfer case end,