Loosening a stuck nut...

[MudRunnerTD]

when he mentioned an electric Rattle gun i was thinking about something like this



http://www.ebay.com.au/itm/240V-IMPA...ht_6044wt_1141

or one of these but they are a little dear to have a go with

http://www.ebay.com.au/itm/DeWalt-DW...d#ht_696wt_907.

The EzyWrench pictured in my previous post delivers the impact like a single hit impact driver you hit with a hammer.

Tony if you have never use one of these you HAVE TO get yourself one mate.

The first time i pulled the trigger on one my father in-law had bought it and i thought...yeah right! Tssssssss! Junk, then it went bang and i could see the potential.

It is an animal mate. eats the toughest of jobs with ease. I have a couple of significant rattle guns and when they both fail i get this little thing out to show em up.

Best describe for the action of these is...

Pull the trigger......

it make a long spool up sound...Wwwhhhhhuuuuuuuuuuuuuuuuuuuurrrrrrrrrrrrrr rrrrrrrrrrr................BANG!!!! CRACK!! job is complete.

Rather than the Rat...Tat...Tat...Tat...Tat...Tat...Tat.. bouncing off the bolt.

if it needs more then just hold the trigger in and it will spool and bang, spool and bang, spool and bang until the job is finished. Crazy!