Koni 82's - Brake line spacer front passenger side
Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
So basically if you've fitted 3" shocks into a 2" lift you'll first up need to extend your bump stops before you turn those lovely new tubes inside out..
If your worried about brake line length then it's probably a good idea to upgrade to a longer line.. while your at it a braided kit..
But if they are shocks suited to a 2" lift then I can't see the issue..
Stock lines are fine but fit spacer if you like..
All you'll do it undo the top bolt, remove bolt, lift block and insert the spacer and insert new bolt..
No need to bleeding or draining etc..
2 min job..
13mm spanner or socket.
Reply With Quote