Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
I am pretty sure the set up is correct I have just been unable to get the settings correct.
The rig goes into limp mode at 2600 and 31-3200 rpms.
I have the boost set to 15 psi it runs at 10 psi at 22-2300 rpm and 100km/ph
The only part of the initial setup I have not achieved is the 1/4 inch drop at the actuator on start up.
I have replaced the MAF but still get the limp.
Any advice would be appreciated
Reply With Quote