OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 62

Thread: For the brake genius out there.

Threaded View

  1. #11
    Advanced
    Join Date
    Jul 2012
    Location
    North East Victoria
    Posts
    58
    Thanks
    36
    Thanked 31 Times in 17 Posts
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Whilst certainly no expert on brakes I experienced a similar problem recently. I had new ( genuine - purchased from patrolapart ) master cylinder fitted by a "reputably" brake business in Wodonga as mine was weeping. Asked them to adjust rear brakes ( drum ) at the same time. Picked up my ute and pedal was going to floor but would firm up with constant use . Took it back & they re bleed system , assured me that they had gotten all air out. Still no good. Went back , they said master cylinder must be faulty. Clamped off brake hoses as pearcey suggested - at least they knew about that technique. Pedal was solid. They then seemed a little lost and proposed a major investigation ( at my expense ) which I declined. Took my ute to another brake guy & discussed problem with him. He mentioned the issue with air being drawn in past the cups but he said it could just be a brake shoe adjustment problem. Left my ute there & he re bleed brakes just to be sure - got " bugger all " air out . Adjusted rear brakes shoes and road tested - all GOOD. My brakes are fine now, probably better then they have been for ages. Needless to say I won't be using the other mob again. Anyway just my experience.
    Remember that a high IQ doesn't make up for a lack of common sense.
    Learn from the mistakes of others - you won't live long enough to make them all yourself !

  2. The Following User Says Thank You to Old Wal For This Useful Post:

    macca (5th July 2014)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •