Simons GU TD42

[Trypt]

Hey guys

thought id start my build thread since the build has officially started.

This is the day i picked her up, 02 TD42T manual 214k on the clock.
DSC_0284_zps5a10bb4f.jpg
DSC_0292_zpsffad47ae.jpg
DSC_0293_zpsa209d31f.jpg
DSC_0298_zpsc219d4b7.jpg


was obviously a family bus previously but has a few minor things done
-Dual batteries
-roof mount LCD (not really useful for me atm)
-narva driving lights
-tjm winch bar
- 2 inch coils (unsure of shocks)
had some hideous wiring so that was the first project, took most of the first weekend to sort out the fire hazard under the dash.

Now to the build. tonight i started my power/reliability mods

The list includes
-IAT and EGT sensors Running off a single Auber digital gauge
-Top mount intercooler (200x380) dunno what the factory nissans ones were but this one was free and will be an easy to fit.
-IC fan
-Port and polish the exhaust manifold. just mild to increase boost response.
-3 inch exhaust

All of this with the aim to increase power, torque and responsiveness.

first up the IAT sensor.
(excuse the crap phone photos)
Using a k type thermocouple with a 1/8'' NPT gland.

Drilling and tapping the intake manifold.
CAM00045_zps376322e1.jpg
i chose this point coz its close to the inlet of the manifold and has meat (the bolt hole was for a loom clamp)

Fit the gland.
CAM00047_zps9edc690e.jpg
Fit the probe and gland nut and admire your handy work while you finish your beer.
CAM00049_zps6a112f07.jpg
CAM00051_zps16c72e7e.jpg

ill try keep this thread up to date.

next up is Exhaust manifold, egt probe and port polish.