Hi.

Just thought I'd put this out there.

I'm trying to make an enclosure fir my Honda EU20i.

The main reason is to quiet it even further.

I have installed a James Baroud roof top tent which I am installing an Air-command Sparrow lightweight Air conditioner to.

As most of you know I work in very remote aboriginal communities where petrol sniffing is a real issue. Even though I will run the generator on opal fuel I don't want draw attention to the fact there is generator running.

I have seen this done before.

Here is what I have built so far.

ImageUploadedByMotorculture1391384116.960520.jpg

Hole cut for high captivity fan.

ImageUploadedByMotorculture1391384149.713228.jpg

ImageUploadedByMotorculture1391384162.681115.jpg

ImageUploadedByMotorculture1391384181.350340.jpg

Soundproofing with heat stuff

ImageUploadedByMotorculture1391384207.865565.jpg

ImageUploadedByMotorculture1391384224.951680.jpg

External weather proof power point wired to 10A plug to plug straight into genny

I have also purchased an exhaust shroud to take exhaust fumes and heat out of 100L esky

ImageUploadedByMotorculture1391384367.014932.jpg

In addition to the exhaust shroud I will also instal a vent that will allow the enclosure to be fully vented - the large ultra quiet fan will push a considerable amount of fresh air into the enclosure so I want an extra exit for heat air exchange.

ImageUploadedByMotorculture1391384517.813278.jpg

I will also put an engel fridge thermometer into the enclosure to monitor temp.

Your thoughts?

Marty.

I will add more as I go.