OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 37

Thread: Common UHF problems

Threaded View

  1. #1
    Patrol God taslucas's Avatar
    Join Date
    Aug 2011
    Location
    North West Tas
    Posts
    10,804
    Thanks
    3,366
    Thanked 6,885 Times in 3,670 Posts
    Mentioned
    56 Post(s)
    Tagged
    1 Thread(s)

    Common UHF problems

    Ive got a few questions to ask the more knowledgable:

    1. Can the UHF be damaged by using it without an aerial (coaxial rattled loose). If so, is there anyway to test if this has happened?

    2. What is the best db aerial for hilly and densly forested areas? Ive heard 3db is best?

    3. What is "ground dependant" and is this design the best for a 4wd?

    4. My UHF is wired straight to the battery (positive and negative) as this was suggested in the instructions of the UHF so that the unit can be used without having the ignition on. EDIT: is this an ok set up? Is there any downside to this set up?

    5. What is the best MHz aerial? Ive seen listings for 477MHz and 27MHz


    I did notice the cable had come out of the back once a while ago but im not sure if i used it like that or not.

    I tried to use it last weekend and i could hear and talk if the other car was very close (like 15 metres) but not any further away. The other vehicles say that im very distorted.

    In open area i could hear the odd bit from the others up to 100 metres away but they couldnt hear nothing from me.....
    Last edited by taslucas; 27th August 2013 at 08:52 PM.
    Hello from Under Down Under!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •