OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 114

Thread: Solar charging

Threaded View

  1. #11
    Travelling Podologist Cuppa's Avatar
    Join Date
    Jan 2011
    Location
    Ballarat, Vic
    Posts
    6,793
    Thanks
    2,165
    Thanked 7,535 Times in 3,039 Posts
    Mentioned
    176 Post(s)
    Tagged
    0 Thread(s)
    Another possibility which can make a panel appear to be putting out less amps than it is rated for is cable sizing. If too thin you get voltage drop (from the wire's resistance) & consequently less amps. A common trap for the unwary is that automotive cables sizes include the insulation so that, if for example someone needs 6mm2 cable for a certain length & buys 6mm autocable, the size of the copper core in the autocable will only be about 4.5mm2, & could easily account for the loss of a couple of amps output (lost to the cable as heat).I have used 6 B&S (13.2mm2) for a 10metre length to my 300w of portable panels.
    Last edited by Cuppa; 27th November 2012 at 09:39 PM. Reason: Corrected the size of cable I used for my portable panels.

    2006 4.2TDi ex-Telstra Remote area Camper.
    Patrol Sold after 11 years of ownership Replaced with 2006 OKA NT Expedition Truck. Cummins, Allison & lots of goodies
    A Nomadic Life (Blog)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •