The gu had a hatch??
Well there ya go
Cheers
Kallen Westbrook
BigRAWesty (27th May 2016), gubigfish (7th June 2016)
Ok so taken some pics today side by side..
Unfortunately it's going to take more work than I deem worthy imo..
The Lra tank needs to be shortened as the back of the tank will foul the cross member, the top hatch needs modifying, and then breather lines moved..
Then (and I've never really niticed this) they hang hell low!!!
Imo a tank needs to be level with the chassis.. the sub tanks seem to sit 50-60mm below...
Cheers
Kallen Westbrook
Robo (6th June 2016)
Cheers
Kallen Westbrook
Have a pic some where of the sub tank when I replaced the sender unit.
but have attached a mod of your pic.
lra n std tank.jpg
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
BigRAWesty (6th June 2016)
Found partial pic of my GQ sub tank.
cropDSCF4752.jpg
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
BigRAWesty (7th June 2016)